RTS KP95 User Manual download pdf (Page 16)

Advant Controller 31 / Issued: 03.99

Hardware 07 KP 90 R303

8 .1

1.7.5 Mechanical data

Mounting on DIN rail in accordance with DIN EN 50022–35, 15 mm deep.

The DIN rail is located in the middle between the upper

and the lower edges of the module.

Fastening by screws using 4 M4 screws.

Width x height x depth 140 x 120 x 85 mm

Wiring method by removable terminal blocks with screw-type

terminals, max. 2.5 mm

Weight 450 g

Dimensions for mounting see the following drawing

120

130

140

111

1.7.6 Mounting hints

Mounting position vertical, terminals above and below

Cooling The natural convection cooling must not be hindered by

cable ducts or other material mounted in the switch-

gear cabinet.

The device is 85 mm deep. The interface connectors RCOM and CONSOLE are set deeper so that the mount-

ing depth required does not become any larger even with detachable interface cables. If, however, a DIN rail is

used, the mounting depth is increased by the overall depth of the rail.

Fig. 13: Dimensions of the Communications module 07 KP 90 R303,

front view, the dimensions for assembly bore holes are printed in bold

All dimensions in mm.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 89 90

No comments

RTS KP95 User Manual Page 16