RTS XCP-24-USOC User's Guide download pdf (Page 19)

Chapter 5 – Callback Security

Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387A) 19

Direct Connection

Use this procedure when you want to connect without first being called back. The password that you use must be

set up for an optional direct connection.

1. Using a data communications program such as HyperTerminal, dial the number of the callback modem.

2. When the connection is established, the callback modem responds with the following message:

Password>

3. Type a direct connection password, press the - key, and then press ENTER. You have three attempts or

one minute to enter a valid password.

4. If the password is valid, the following message appears and the modems establish a working connection:

OK Connecting

Note: You can make all calls direct connect regardless of whether the password or phone number has the -

character by using the %H1 command

Callback Security Commands

The AT Commands related to Callback Security are included in the AT Commands Reference guide included on

MT9234ZBA-Series product CD.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

No comments

RTS XCP-24-USOC User's Guide Page 19