RTS XCP-ADAM-MC User Manual download pdf (Page 8)

Power......................................................................................................................................................5W Typical

Physical .......................................................................................................................................8.25” W x 6.25” L

RVON-C JUMPERS and CONNECTIONS

A selectable RS232/485 serial port is at connector J1 Serial (see Figure 2 on page 8) on the backcard. Jumper connections on

J10, J11, and J12 (on the front card, see Figure 1 on page 7) select the signal mode on J1.

• When J10, J11, and J12 are jumped from pins 1 to 2 - J1 is configured for RS485.

• When J10, J11, and J12 are jumped from pins 2 to 3 - J1 is configured for RS232.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 58 59

9350-7835-000 Rev C 03/2009 1
Contents 3
Introduction 5
Features 6
Specifications 6
Default Ethernet IP Addresses 7
Backcard - RVON-C 10
RVON-C Backplate 10
Installation 11
Switches and Connections 12
Slot 1: 1-8 22
Slot 2: 9-16 22
Slot 3: 17-24 22
Slot 4: 25-32 22
1. Open AZedit 24
6. Click Open 25
7. Click Begin Download 25
8. Click OK 25
REAR VIEWREAR VIEW 26
RVON-C Card 27
Serial Port Programming 27
Access Serial Command Mode 30
Serial Command Table 31
RVON-C Default Setup 32
RVON-C Quick Start 33
Configure the RVON-C Card 36
RVON-C backcard 38
Basic Network Configuration 39
TABLE 4. Packet Translation 41
TABLE 5. Packet Translation 42
IP ADDRESSES 43
Ping a Computer 44
RVON Configuration 45
Network Terminology 47
RVON Trunking Connections 51
Figure 13: RVON-16 Trunking 58

Comments to this Manuals

No comments

RTS XCP-ADAM-MC User Manual Page 8

Comments to this Manuals

Related products and manuals for Door intercom systems RTS XCP-ADAM-MC