RTS XCP-40-RJ11 Installation Guide download pdf (Page 25)

Connections to the ADAM Frame

PAP-32 Program Assign Panel

The PAP-32 connects to J3 on the ADAM system, port 902 on an ADAM CS system. The baud rate, as will all UIO-256, PAP,

and LCP-102 devices is fixed at 76.8k baud.

A cable must be made to connect the PAP-32 to the system. See the following figures for the proper cabling diagram.

FIGURE 1. PAP D-sub Cable Diagram

FIGURE 2. PAP-32 RJ-12 Cable

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

No comments

RTS XCP-40-RJ11 Installation Guide Page 25