RTS XCP-32-DB9 Specifications Page 56
- Page / 106
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
56 - Connecting Serial Devices DeviceMaster Installation and Configuration Guide: 2000506 Rev. B
DeviceMaster 2-Port with Serial Terminals
DeviceMaster 2-Port with Serial Terminals
Use the following information to connect the DeviceMaster UP 2-port.
1. Connect your serial devices to the appropriate serial port on the DeviceMaster UP
using the appropriate cable. You can build your own cables or loopbacks using the
appropriate discussions:
• Serial Terminal (4) Signals (1E)
on Page 56
• Serial Terminal (8) Signals (2E) on Page 57
• DeviceMaster 1E (Serial Terminals) Cables and Loopbacks on Page 63
• DeviceMaster 2E (Serial Terminals) Cables and Loopbacks on Page 65
Note: Refer to the hardware manufacturer’s installation documentation if you need help
with connector pinouts or cabling for the serial device.
2. Verify that the devices are communicating properly. Use the appropriate table for
information about the LEDs, which may provide information about the installation.
Serial Terminal (4)
Signals (1E)
Use the following table or drawings for signal information. The signals for SERIAL2 are
the same as SERIAL1.
2-Port LED Descriptions
STATUS
The STATUS LED on the device is lit, indicating you have power and it
has completed the boot cycle.
Note: The STATUS LED flashes while booting and it takes approximately
15 seconds for the Bootloader to complete the cycle. When the
Bootloader completes the cycle, the LED has a solid, steady light
that blinks approximately every 10 seconds.
LINK
If the LINK (green) LED is lit, it indicates a working Ethernet
connection.
ACT If the ACT (yellow) LED flashes, it indicates network activity.
Note: For additional LED information, go to the STATUS LED table on Page 97.
CTSRxDRTSTxD
RS-232†
RxD+
RxD-
TxD+
TxD-
RS-422
RS-485 Full-Duplex
TRxD+
TRxD-
RS-485 Half-Duplex
† † RS-232 ground must be connected to the appropriate signal ground terminal..
† Wire gauge: AWG 12-22
Signal
Ground
Not connected
Positive†
Return†
5-30VDC
Signal
Ground†
Chassis
Ground†
- Table of Contents 3
- Table of Contents 4
- Introduction 7
- Step 4: Update SocketServer 10
- Developer’s Kit 11
- Hardware Installation 13
- 1-Port - Enclosed Models 14
- 1-Port - Embedded Model 16
- Mounting the Embedded 17
- 2-Port (DB9) 1E/2E Models 22
- 4-Port and 8-Port Models 24
- 10/100 NETWORK 25
- 16-Port (DeviceMaster PRO) 28
- Larger picture, Page 94 31
- Initial Configuration 33
- Uploading SocketServer 37
- Device Driver Installation 39
- Secure COM Port Set Up 45
- Socket Port Configuration 49
- SocketServer Architecture 50
- SocketServer Versions 52
- Connecting Serial Devices 53
- * Represents port number 54
- Managing the DeviceMaster 67
- Using Configuration Files 69
- Managing Bootloader 70
- Uploading Bootloader 71
- Replacing a DeviceMaster 72
- Socket Port 74
- RedBoot Procedures 75
- Resetting the DeviceMaster 78
- Uploading Firmware 79
- Telnet Method 80
- Configuring Passwords 82
- Redboot Command Overview 83
- Hardware Specifications 85
- Serial Communications 86
- 16-Port Power Supplies 89
- DeviceMaster Product Pictures 90
- 1-Port (DB9) 5-30VDC 91
- 1-Port Embedded 92
- NEW GRAPHIC NEEDED 94
- Important Safety Information 96
- ™ checksum failure 97
- Troubleshooting Checklist 98
- General Troubleshooting 100
- Technical Support 102
Related products and manuals for Door intercom systems RTS XCP-32-DB9
Door intercom systems RTS KP-98 User Manual
(60 pages)
(60 pages)
Door intercom systems RTS KP-97 User Manual
(31 pages)
(31 pages)
Door intercom systems RTS KP95 User Manual
(11 pages)
(11 pages)
Door intercom systems RTS KP-97 User Manual
(22 pages)
(22 pages)
Door intercom systems RTS CM300 User Manual
(25 pages)
(25 pages)
Door intercom systems RTS KP95 User Manual
(20 pages)
(20 pages)
Door intercom systems RTS RVON-C User Manual
(29 pages)
(29 pages)
Door intercom systems RTS WM300 User Manual
(13 pages)
(13 pages)
Nexcom NViS 2310 manuály
Uživatelské manuály a uživatelské příručky pro Hardware Nexcom NViS 2310.
Poskytujeme 1 manuály pdf Nexcom NViS 2310 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comments to this Manuals